SilverSol®

detail_1
SilverSol® is the colorless, tasteless, and odorless solution suspended in the distilled water as the state of colloid. SilverSol® is produced from pure silver (Ag 99.99%) through high electrical voltage. The particle size of SilverSol® is between 3-5 nano meter (nm) as compared to common colloidal silver which is 8nm-10micron. Therefore, SilverSol® is considered first of its kind to be developed in worldwide.

Traditionally, silver products are very expensive as the method of production is very costly. Therefore, it is only being used in the countries producing it such as US and Korea. The field of applications is mainly for cosmetics, stock raising, natural inorganic antibacterial agent and agriculture purpose that required low or chemical free products. However, the uses of silver now are very vast.

In NSM®, we are able to produce high quality SilverSol® utilizing the latest nanotechnology with mass production of more than 20 tons a day at very low cost which make it inexpensive commercially.

  • Multi-functions as antibacterial, anti-fungus, antivirus, deodorization, sterilization
  • Broad range of anti-bacteria spectrum.
  • Cost and functionally competitive compared with other silver products.
  • Environment friendly and non-toxic.
  • Harmless to human body
  • Indefinite lasting effects

Comparison Table with Other Colloidal Silver Producters

Properties

SilverSol®

Competitor 1 (Korea)

Competitor 2 (Korea)

Competitor 3 (USA)

Competitor 4 (USA)

Concentration

100,000ppm

1,000ppm

2,000ppm

100ppm

10ppm

Particle size

3 to 5nm

1 to 10nm

10 to 40nm

5 to 10nm

4 to12 nm

Basic Material for dispersion

Water

Water, Ethylenglycole, Alcohol, DMF, Glycerine

Water, Alcohol/ Poliol, Solvent

Solvent

Water, Ethanol, Solvent

Ingredients

Silver 100%

Silver + Silica

Silver + a material for dispersion

Silver + a material for dispersion

Silver + a material for dispersion

Colour

Colorless & Transparent

Black

Black

Black

Black

Specific gravity

1.1.2±0.1

—

—

1.05±0.1

—

Others

Developed catalyst for preventing discoloration

Developed 5,000ppm of colloidal silver, but discoloration in applying to white materials

Using a surface active agent for dispersion in order to prevent making a lump of silver particle

Using a surface active agent for dispersion in order to prevent making a lump of silver particle

Using a surface active agent for dispersion in order to prevent making a lump of silver particle

Shape of SilverSol®

  • Particle size: 3-5 nm
  • Properties and effectiveness will not change even after a long custody.

Potential of SilverSol®

  • 10ppm (10mg/litre) to 120,000ppm depending on the applications.
  • Approx. 340 billion silver particles exist in 1 cc silver ion water.

pH (Potential of Hydrogen) of SilverSol®

  • Can produce from pH5 to pH 10 depending on applications

Sterilizing Power of SilverSol®

  • Extensive antibacterial abilities against around 650 kinds of pathogenic organism.
  • 99.9% sterilizing power against E.coli / S.aureus / P. aeruginosa / S. typhi tested by Korea nationally authorized test center.
silversol_1

Test Method

Test Results

Shake Flask

Item

Blank

Sample

Test bacteria: Escherichia Coli.
Initial no. of bacterial 4.0 x 105 4.0 x 105
After 10 minutes 5.5 x 10
Rate of reduction 99.9%
Test condition: measure the sample by diluting as much as 100 times

Shake Flask

Item

Test bacteria: Staphylococcus aureus
Initial no. of bacterial 2.5 x 105 2.5 x 105
After 10 minutes 2.2 x 10
Rate of reduction 91.2%
Test condition: measure the sample by diluting as much as 100 times

Shake Flask

Item

Test bacteria: Pseudomonas aeruginosa
Initial no. of bacterial 5.0 x 105 4.0 x 105
After 10 minutes 2.6 x 104
Rate of reduction 94.8%
Test condition: measure the sample by diluting as much as 100 times

Shake Flask

Item

Test bacteria: Salmonella typhi
Initial no. of bacterial 1.9 x 105 4.0 x 105
After 10 minutes Not detected
Rate of reduction 100%
Test condition: measure the sample by diluting as much as 100 times

Shake Flask

(FC-TM-19-2001)

Item

Test bacteria: Candida albicans ATCC 14053
Initial no. of bacterial 1.4 x 104 1.4 x 104
After 30 minutes 1.5 x 105 < 10
Rate of reduction 99.9%
Test condition: Essence of vaginal cleansing wet tissue

Textile

Item

Test bacteria: Staphylococcus aureus
Initial no. of bacterial 1.5 x 105 1.5 x 105
After 18 hours 7.1 x 105 8.1 x 104
Bio static value 2.0
Test condition: Cotton

Textile

Item

Test bacteria: Klebsiella penumonia
Initial no. of bacterial 1.3 x 105 1.3 x 105
After 18 hours 6.2 x 106 2.1 x 104
Bio static value 2.5
Test condition: Cotton

The application of SilverSol® is vast and diverse in potential in many sectors and industries. The followings are some of the applications which have been acknowledged by global researchers and producers of nano silver, and the following list is by no mean exhaustive.
silversol_02

Sector / Industry

Application

Water Treatment
  • Cooling water treatment
  • Water Filtration
  • Algae-cide
  • Repelling agents for red-tide

Industrial supplies
  • Transparent antibacterial plastics
  • Adhesive
  • Paint
  • Cutting oil
  • PU foam
  • Wall paper / Floor paper

Fiber
  • Clothes
  • Baby supplies
  • Underwear
  • Footwear

 

 

 



    Send Enquiry